Enter "CM" to access User Interactive Mode:
("CM" => Hold 'reset' while pressing 'unlock')
1 - Panic! mode
2 - Display high speed
      1 - clear high speed from memory
3 - Activate accessory power
4 - Enter configuration menu
      1 - configure windows [requires PIN]
	   *1 - disable
	    2 - enable and calibrate windows (PIN)
	    3 - window up strength, normal (PIN)
	    4 - window up strength, strong (PIN)
      2 - configure door locks
	   *1 - disable
	    2 - active on hand brake
	    3 - active on transmission in PARK
	    4 - active for both 2 and 3
      3 - configure accessory power
	    1 - disable control
	    2 - activate power on exit
	   *3 - activate power on triple unlock via FOB
	    4 - active for both 2 and 3
	    5 - adjust accessory power timeout
	          1 - 30 seconds
	          2 - 5 minutes
	         *3 - 15 minutes
      4 - restore factory defaults (marked with *'s)
	    1 - restore now
(Press reset to exit and cancel any incomplete changes)